Mining chain hydraulic shears
Mining chain hydraulic shears technical parameters
Model
Maximum link diameter
Cutting force
< br/> Working pressure
Handle operating force
/>
Mining chain hydraulic shears Purpose The split anchor chain (circular link chain) cutter produced by Jining Dingcheng Industrial and Mining Equipment Co., Ltd. is mainly used for cutting anchor chains (circular link chains) in various industrial and mining, metallurgy, petroleum, bridges, fire protection and other departments. The mining chain hydraulic shears adopt a split structure, which is small in size, light in weight, easy to operate, flexible in use, and has strong cutting force. In particular, the mining chain hydraulic shears do not require a power supply and are more suitable for field operations.
The mining chain hydraulic shear has compact structure, uses high-quality materials and is processed with the most advanced technology. It is currently the most ideal anchor chain (round chain) cutting tool in China.
How to use and pay attention to the mining chain hydraulic shears
The mining chain hydraulic shears are used to cut off the metal materials of the circular chain. When using, adjust the bolt according to the diameter of the ring chain, and place the anchor chain ring chain at a right angle to the cutter head. When using, first fill the hand pump with anti-wear hydraulic oil, and then turn the hand pump The quick joint is connected to the main engine oil cylinder. Tighten the oil drain screw on the oil pump to start working. When the work is completed, loosen the oil drain screw and the working oil cylinder will automatically retract.
Return a few working strokes before use. , wait until each part moves flexibly and there is no oil leakage before use.
If air-drying occurs during use, you can loosen the oil drain screw on the pump body first, hold the pump vertically and air-dry it with the head down for a few times, then tighten the oil drain screw, and you can continue to use it
When there is a load, do not remove the quick connector to avoid accidents and damage to the machine parts. Check the oil level. If the oil level is insufficient, the machine will not be able to maximize its performance. Some abnormal situations such as poor movement are caused by insufficient oil.
Use anti-wear hydraulic oil or transformer oil in the cylinder. When refueling, you can remove the rubber protective sleeve at the end of the oil pump, and then unscrew the hexagonal socket screw to connect the oil outlet pipe to refuel, but when refueling, be sure to slow down and shake the handle to exhaust it. If the oil pipe no longer bubbles, it is full
After breaking, no scraps of material are allowed between the blades of the tool holder. Otherwise, the moving cutter head will be blocked and the body will be damaged.
For hard and tough steel, the maximum cutting force must be calculated, and attention should be paid to the short material head flying out and injuring people, and safety measures to be taken
Business scope Hydraulic, electric tools, road machinery, mining machinery and accessories, track Traffic maintenance equipment
Contact Wang Aizhi
Mobile phone
Landline
Email
Mining chain hydraulic shears